32x10 MS Flats are solid rectangular mild steel bars, nominally 32 mm wide and 10 mm thick. They provide starting material for connector tabs, bracket pieces and similar components specified by your drawing. Check the grade, required lengths, connection preparation and any specified surface finish before selecting supply. Explore this section at SteelOnCall, compare available prices and bar lengths, and review delivery arrangements for the quantity required by your workshop.
For today’s price and discount
32x10 MS Flats offer a solid mild steel section with a nominal width of 32 mm and thickness of 10 mm. The bar can be used as stock for connector tabs, bracket pieces and components where the drawing specifies this size. The workshop prepares these bars to your component dimensions.
Tabs for Connecting Components
A connector tab extends from one part of an assembly to meet another. Its outline, fixing details and final position come from the design. When this MS flat bar is selected, check the piece against surrounding parts before preparing holes or joining faces.
Tabs with the same outer dimensions may be fitted in different directions. Show orientation on the drawing, including required left and right pieces. Marking each component reference on the part list helps the workshop avoid mixing those arrangements.
Size Details for the Order
The 32x10 reference means width followed by thickness in millimetres. Supply length is measured along the bar and should be stated separately. Review the offered grade, tolerances and lengths against the component requirements before deciding the quantity.
From Supply Length to Tab
Count the number of components and record their cutting lengths. Group matching blanks while keeping different hole patterns and end details identifiable. Include allowance for the cutting or finishing process selected by the workshop.
Fabrication methods should suit the steel grade and the connection requirements. Where the tab needs a protective finish, plan the preparation of edges, holes and contact faces with the assembly sequence. The final location determines the treatment specified for the completed item.
Review the 32x10 MS Flats price at SteelOnCall for the chosen specification and quantity. Compare available lengths and the pricing unit, and include applicable delivery charges and taxes in the order cost. Buy MS flats online through SteelOnCall with the connector details ready. Check supply and delivery options for your location, then select the material for the tabs and brackets on your list.