75x20 MS Flats are solid mild steel bars with a nominal 75 mm width and 20 mm thickness. They can supply fixture blanks, mounting pieces and fabricated components specified in your drawing. Check the grade, required lengths, the specified surface finish and allowance for planned machining before ordering. At SteelOnCall, compare available bar details and prices, review the material quantity and check delivery options for your workshop's planned fabrication work.
For today’s price and discount
75x20 MS Flats provide rectangular mild steel stock for fixture blanks, mounting pieces and components designed around this section. The nominal width is 75 mm and the thickness is 20 mm. These dimensions identify the starting bar, while the component drawing defines the finished part.
Material for Fixture Blanks
A fixture may hold or locate parts during workshop operations. Where its design specifies an MS flat bar, the faces, holes and fixing arrangement must be clear before preparation starts. The selected grade should also match the material requirement shown on the drawing.
Some faces may need machining to achieve the finished dimensions or surface condition. Review these operations with the workshop before choosing stock. Include any preparation allowance in the blank size and keep it visible alongside the final component measurements.
Keep the Size Reference Accurate
The 75x20 reference gives nominal width followed by thickness in millimetres. Supply length is a further detail to select. Check the offered dimensions and tolerances against the drawing so the material purchased agrees with the planned fixture part.
Organise the Workshop Order
Record the number of blanks at each starting length. Components may share this section while requiring separate hole patterns or finishing operations. Keep those differences linked to drawing references through cutting and further preparation.
Choose processing methods appropriate to the grade and completed component. The required finish should follow the fixture specification and the environment of use. Consider contact faces and surfaces that become hidden after assembly when planning preparation.
Check the 75x20 MS Flats price at SteelOnCall for your specified grade and quantity. Compare the offered lengths and the pricing unit. Include delivery charges and applicable taxes when calculating the cost of the material requirement. Buy MS flats online through SteelOnCall for your workshop fixtures. Review available product details, check service to the delivery PIN and select the steel that matches your blank schedule and fabrication plan.