122x61x4.8mm MS Rectangular Pipe supplies a hollow mild steel section with nominal outer sides of 122 mm and 61 mm and a 4.8 mm wall. It can provide cross members and mounting rails specified in equipment drawings. Confirm the grade, supply length and connection preparation before ordering. At SteelOnCall, compare available material details and prices, review the quantity required and check delivery options for your workshop or chosen project location.
For today’s price and discount
122x61x4.8mm MS Rectangular Pipe is a hollow mild steel product with nominal outer dimensions of 122 mm by 61 mm and a 4.8 mm wall thickness. It can provide cross members or mounting rails where the equipment design specifies this section. Keep all three measurements with the material requirement.
Cross Members Within a Frame
A cross member links positions within an assembly and carries the attachments shown on its drawing. A mild steel rectangular pipe supplies the starting member when selected by the design. Its role, orientation and connections must agree with the surrounding equipment frame.
Check the distance between the adjoining members and the way the ends meet them. The finished length may include preparation for plates, joints or other fittings. Record these details with the component reference before the workshop prepares the tube.
Use the Listed Measurements
The 122x61 reference describes the outside of the rectangular hollow section. Wall thickness is listed separately as 4.8 mm. Confirm supply length, steel grade and dimensional tolerances when reviewing the offered material for the assembly.
Keep Mounting Points Identified
Different cross members may share a section and length while needing separate attachment positions. Give each one a drawing reference. Mark which faces receive holes or prepared connections so the workshop can relate the tube to its place in the finished equipment. Include every different member type.
Choose preparation and joining methods for the material grade and connection requirements. Review the specified finish around mounting points and contact areas. Faces enclosed by plates or neighbouring members may need attention before those parts are fitted together.
Compare the 122x61x4.8mm MS Rectangular Pipe price at SteelOnCall for the grade, length and quantity needed. Check the stated pricing unit and include applicable freight and taxes when reviewing the order amount. Buy MS rectangular pipes online through SteelOnCall with your member schedule ready, then check supply and delivery details for the workshop completing your equipment fabrication.