Description
Radha TMT Bars are a prestigious product in the Radha Group. Radha TMT is proud to be one of the major producers of the TMT Bars to adopt the highly acclaimed, cutting-edge Thermex.German technology. Radha TMT steel bars also offer the additional advantage of being anti-corrosive, earthquake & heat resistant.
Manufacturing Process Of Radha TMT Bars
Radha TMT bars are made from the hot rolling process and are subjected to microprocessor-controlled thermo-mechanical treatment. The Three steps to know in which manner, the Radha TMT steel bars are made from is given as below
- Quenching
- Self Tempering
- Atmospheric Cooling
Specifications Of Radha TMT Steel Bars
- Available Sizes-8mm, 10mm, 12mm, 16mm, 20mm, 25mm and 32mm
- Grades-Fe 415, Fe 500, Fe 550, RADHA 550 TMT BARS (RADHA 550 TMT BARS have the highest tensile and load-bearing strength)
Mechanical Properties Of Radha Steel TMT Bars
- The minimum yield stress value for Fe 550 is 550n/mm2 and it is less than Radha Fe 550 i.e 570 n/mm2.
- The value of tensile strength in the form of N/mm2 for Fe 550 is 585 and Radha Fe 550 is greater than 640.
- For Radha Fe 550, the elongation percentage is greater than 16 and for Fe 550 is given as 10%. To test the material for tensile strength it elongates a certain amount before fracture takes place.
Chemical Properties Of Radha TMT Steel Bars
Chemical Composition Of Radha TMT Steel Bars: Carbon, Sulphur, Phosphorus, Sulphur phosphorus and carbon equivalent will be ranging from less than 0.30% to less than 0.40% for Fe 415, Fe 500, Fe 550.
Features Of Radha Steel TMT Bars
To buy any type of TMT bars, ensure the following features. Since Radha TMT Bars have all these specified features. So, buy Radha TMT steel bars to build their construction in an effective manner with affordable Radha Steel TMT Prices.
- High-pressure water descaling facility-ensures scale-free TMT bars.
- Inter stand tension control rolling MTC (Minimum Tension Control).
- Billet weighing facility.
- The consistency of the parallel rib pattern is uniform and guaranteed.
- Higher yield strength, Ultimate tensile strength, and higher percentage elongation when compared to cold twisted bars of the same grade.
Advantages Of Radha Steel TMT Bars
Weight and Length- On the manufacturing of Radha TMT steel bar sizes, it follows BIS Norms as per BIS Standards to get perfect weight & length of Radha TMT Bars.
Bendability- Radha TMT bars are capable of absorbing a large amount of energy by plastic deformation before undergoing failure by fracture by high elongation Factor, so it will gain the bendability factor easily in the process of construction.
Resistant To Fatigue- Radha TMT bars can withstand any dynamic loading due to their excellent strength of the surface layer. This makes Radha Steel TMT Bars a unique choice for a super-strong construction.
Weldability- Higher concentration of carbon and other alloying element tend to increase hardness and decrease the weld-ability.
Safer Structures: Due to higher strength combined with higher ductility, Radha Thermex TMT bars build safer structures.
Formability: Due to very high elongation values and consistent properties Radha Thermex TMT Bars have excellent Formability, workability, and bendability.
Applications Of Using Radha TMT Bars
- Single Storied Houses
- Multi-Storied Buildings/Complexes
- Tunnels
- Bridges
- Flyovers
- Dams
- TV towers
Steeloncall.com is the largest trading e-commerce company to supply the Radha steel bars for those who are looking to construct the building with one of the best steel materials.