Top brands of construction steel

Top brands of construction steel

Steel is produced by two methods. One is the primary method and the other is the secondary method. The steel produced by primary methods are called as primary producers and other secondary methods are called as secondary producers.

PRIMARY STEEL PRODUCTION:

Primary Brand is produced from a steelmaking process known as BOF (Basic Oxygen Furnace) also known as a converter process. Here iron ore is converted into steel. It is manufactured from the raw material of iron ore. In the primary method, steel is produced directly by the processing of iron ore like Magnetite, Hematite, etc.

SECONDARY STEEL PRODUCTION:

The Steel produced by the method using available steel like scrap, billets, etc is called secondary method. In this process, to acquire the desired quality required elements will be added. Generally, it is made through the arc furnace route.

There are a number of Re-Rollers in India. There are around 180 number of Re-Rollers in India. They are mainly conglomerated where there are primary steel producers located mainly for their raw material requirements. The capacity of Re-Rollers is very low compared to primary producers. So they can cater to the requirements of a small segment of customers.

Generally, steel produced by the primary method is superior in quality compared to the Secondary method.

Comparison of Primary and Secondary Steel:

The quality of primary steel is superior to secondary steel as the primary steel is produced high-end technical process to control mechanism. The primary steel quality will be consistent, uniform, chemically and mechanically better in properties. The prices of primary products will be higher than the secondary products. For Heavy Structures expecting a longer life, load-bearing units, etc. It is better to go for the main producer of steel.

In case of light structures like a compound wall, flooring structures, single-storey buildings, lintels, etc. Secondary steel can be used because of lower prices. Otherwise, it is always preferable for going to primary steel. The benefits of primary steel are higher compared to secondary steel because of better quality controls & superior process.

The difference in the prices of primary Vs secondary steel is very low compared to the total cost of a building.

The list of primary and secondary steel producers in India:

Primary Steel

The quality of primary steel is superior to secondary steel as the primary steel is produced high-end technical process to control mechanism. The primary steel quality will be consistent, uniform, chemically and mechanically better in properties.

RINL (Vizag Steel)

RINL is a single entity plant located in Visakhapatnam in Andhra Pradesh. The capacity of the plant is 5.0 million tonnes. It is a Govt undertaking under the ministry of steel. The main products of RINL are long products. TMT Rebars Fe500/550D Grade Wire Rod Coils, MS & Special Steels like H.C, EN8D, EN8, Electrode Quality, etc. Structural Steel like Angles, Channels, Beams, Flats, Rounds, etc

SAIL (Steel Authority of India Ltd)

It is also a group of India undertaking under the ministry of steel.

It is holding the company of

  • Bhilai Steel Plant
  • Bokaro Steel Plant
  • Durgapur Steel Plant
  • Rourkela Steel Plant
  • Solun Steel Plant
  • Visvesvaraya Iron & Steel Plant
SAIL Produces both Flat and long products. Flat products include Plates, Sheets, etc. Long Products are WRC, TMT, Structurals including rails for railways. SAIL produced 16.3 million tonnes of Steel during 2018-2019.

TATA STEEL

Tata Steel Limited is earlier known as Tata Iron and Steel Company Limited is an Indian and worldwide steel-production organization. The rundown of private steel plants in India is deficient without the notice of Tata Steel as it is additionally a worldwide name for the steel business in India. Tata Steel is one of the main steel makers in India that was established in 1907 by Dorabji Tata and is headquartered in Mumbai. It one of the biggest steel organizations in India. Tata Steel has production capacity of 18.5 million tonnes per year. Their units are located in many places in India and approved by GOVT of India. The plants are located at Jamshedpur, Kalaignar, etc. Recently Bhushan Steel Ltd was taken over in abroad and Europe, Canada and other South East Asia. Tata Steel produces long products & Flat products also. TATA Steel has a good network in semi town areas.

JSW STEEL (NEO Steel)

JSW Steel has a capacity of 18 million tonnes, produces long & Flate products including colour and galvanized sheets. The main plant located at Vijayanagar in Karnataka, and Dalui in Maharashtra. It is one of the latest technological manufacturing units. Its TMT rebars are branded as Neo Steel.

JSPL

It is a 6 million tonnes plant capacity located at Angul in Orissa state. It produces both long and flat products. JSPL TMT rebars brand name is Panther.

ESSAR STEEL

It is located at Hazira in Gujarat state with a capacity of 10 MT per annum. Its products are mainly Flat products, color sheets, galvanized sheets, chequered plates, etc. It has the downstream facility for rolling TMT rebars also.

 

Secondary Steel

Secondary Steel producers develop their brand image segment wise to attract customers available in their local area. The major brands available in Andhra & Telangana are

Simhadri

Simhadri Steel plant is the biggest mini private integrated steel plant in Andhra Pradesh, with railway sidings and located by the side of (Bailadila – Kirundi) KK Railway Line. The capacity of the plant is 3 Lakhs tonnes per annum. They manufacture TMT Bars from 8mm to 32mm.

Mangal TMT

Establishing A.P’s first mini integrated steel plant in 2006. Maa Mahamaya Industries limited has now launched its premium variant of TMT with double ribbed, branded as MANGAL 999. Its annual production capacity is 12,0000 tonnes. It is located in Relligavirammapeta, in Andhra Pradesh. They manufacture TMT Bars from 8mm to 32mm.

Black Gold

Black Gold is located in Visakhapatnam, Andhra Pradesh and is one of the leading sellers of listed products. They manufacture TMT Bars.

Narayani Ispat

Narayani Ispat Private Limited is a listed private company incorporated on 19 January 2012. The plant is located in Visakhapatnam and producer of TMT rebars, angles & Round bars.

Radha TMT

Radha TMT is located in India's fastest growing city, Hyderabad, at the industrial belt at Nacharam, Shankarampet, Chegunta village in Medak district, Telangana. They manufacturers TMT Bars from 8mm to 32mm, MS Flats, MS Squares and Plain Rounds.

Shree TMT

SHREE TMT is the premium flagship product of Devashree Ispat Pvt Ltd. Located outside the city in Mahbubnagar district, Telangana. They manufacturers TMT Bars from 8mm to 36mm.

Sugna TMT

Sugna Metal Limited is located in Azamabad Road, Bagh Lingampally in Hyderabad, Telangana. They Manufacturer's steel bars, billet processing system & TMT Bars from 8mm to 32mm. Sugna Steel processing plant is the biggest and fully automated controlled by PLC (Programmable Logical Control) with the capacity of 2 Lac MTons of TMT Bar per year.

DIIL

Dhan Laxmi Iron Industries Pvt Ltd is located in Balanagar Hyderabad Telangana. They are manufacturers of TMT Rebars, Billets, Structural steel.

JaiRaj Ispat

S K Goenka-promoted Jairaj Ispat Limited (JRIL) and proposed to set up a 1 million tonne per annum capacity steel plant in Mahabubnagar district in Telangana at an investment close to Rs 3,000 crore. They manufacture TMT Bars FE550 from 8mm to 32mm and caters to a wide range of construction requirements.

Tirupati

Tirupati Steel is a quality driven organization offering a wide range of TMT Bars & Structural steel. With a footprint that’s spread all over India including Hyderabad, Goa, Muzaffarnagar, and several parts of North India.

MS Life

It is Established in 2005, the company has grown over the years to become an integrated steel plant having THREE factories spread across Andhra Pradesh and Telangana. The state-of-the-art manufacturing facilities are spread over 350 acres with a production capacity of 1,50,000 MTPA which is expected to reach 2,50,000 MTPA by 2020. They Supply TMT FE-600 with 8mm-32mm Sponge iron, Billets.

Steel On Call
28 Jun, 2019
Request call back

Login With SteelonCall